News Center >





Casting machine wholesale price and risk identification and control measures

Casting machine is a special equipment for casting film. The casting machine first mixes the pulverized resin raw material powder and additives, and heats and melts it to make a slurry with a certain viscosity. After drying and curing, peel off the film to become the green belt, and then according to the size and shape of the finished product, the green belt is processed by punching, lamination, etc., to make the finished product to be sintered. Before understanding the wholesale price of the casting machine, let's first understand its risk identification and control measures.
1. Risk identification
1. The heating system and automatic temperature control system are not equipped with interlocking device and machine overheating protection function, once the temperature is too high, a fire accident may occur. 
2. The equipment exposes dangerous parts and rotating parts, and there is no safety management protection device, which may cause mechanical injury accidents in my country.
3. The wholesale price of the casting machine is also affected by the quality. When the machine is not equipped with an emergency stop device, the location of the emergency stop device is not obvious or the emergency stop device fails. Once an emergency occurs, the equipment management cannot stop working.
4. During the operation of the equipment, those who violate the operating procedures will stretch their hands into the operating area, causing cuts and squeezes.
5. The electrical equipment is not provided with protective grounding or is connected to zero, and the grounding is not connected to zero; electrical short-circuit, open circuit, exposed wires, etc. may lead to electric shock accidents.
2. Wholesale price of casting machine and control measures
1. The equipment should have temperature indicating instruments with precise digital display, and the heating system and automatic temperature control system should have interlocking devices and machine overheating protection functions.
2. Based on the plane where the operator's operating system is located, all transmission belts, rotating shafts, transmission chains, couplings, joints, pulleys, gears, flywheels, sprockets, chainsaws, etc. within 2m in height are exposed to zero danger. Parts and dangerous parts must be equipped with a safety technical protection work device.
3. The working position should be equipped with safety control devices to stop the production equipment partially or completely, so that the production equipment can be stopped in the fastest, safest and most reliable way.


CopyRight © 2020 Changzhou ZL-Machinery Co.,Ltd. Business license     Powered by : www.300.cn  Tags