What are the characteristics of the casting machine?

What are the characteristics of the casting machine?

1) The casting machine has 2500mm, 3000mm, 3500mm and 5000mm according to the film width, and there are three layers, five layers and seven layers according to the configuration of the extruder.

2) It is mainly composed of five parts: extrusion, casting, corona, winding and electric control. Dies and extrusions can be freely combined according to customer requirements to meet the different needs of customers to the greatest extent.

3) In addition, the design of domestic equipment also closely follows the international advanced level, such as:

a. The unique design of the back device can freely adjust the pressure of the extruder.

b. The screw flow channel can be used for different materials, and one machine can be used for multiple purposes.

c. The cooling effect of the flow channel of the roller is good, the quality is stable, and the output is high.

4) The casting machine also has the characteristics of fast production line speed, stable performance, environmental protection and energy saving. The product thickness is 0.017-0.08 mm (calculated according to the international standard of 0.025 mm). It's been a fast-moving year for studio movies. Therefore, the market demand for casting machines is constantly increasing. The annual demand is expected to continue to increase in the next few years. Therefore, the market for casting machines is very broad.

On this basis, some industry insiders predict that with the increase in the number of new films and projects under construction, the production capacity of the film may be temporarily oversupplied in 2021, so a new round of price wars is imperative. If this prediction becomes a reality, the way for casting machining enterprises to avoid vicious competition in the market is to take the road of independent innovation and develop differentiated and specialized products. Another important link is to reasonably select equipment and its suppliers.

Using a high-precision electronic ceramic casting machine, the ceramic casting is carried out with alumina as the main raw material. First, the pulverized powder is mixed with binder, plasticizer, dispersant and solvent to make a slurry with a certain viscosity. The slurry flows out from the hopper and is coated on a special base tape with a certain thickness with a scraper. After drying and curing, it is peeled off from the top to become a green belt film. Then, according to the size and shape of the finished product, the green belt is processed by stamping and lamination to sinter the finished blank. It has the advantages of low cost, high quality, non-toxicity and simple production process. We are a manufacturer of casting machines, with many years of production experience, advanced technology, continuous innovation, catering to the development of the times, and constantly developing new products to meet the needs of the market.