02-17

What are the characteristics of the casting machine?

What are the characteristics of the casting machine? 1) The casting machine has 2500mm, 3000mm, 3500mm and 5000mm according to the film width, and there are three layers, five layers and seven layers according to the configuration of the extruder.

02-17

How to maintain the cast film machine daily?

In the extrusion belt casting, the plastic pellets are plasticized by a screw, and then extruded in a linear state through the die of a flat die. After stretching, the plastic particles are attached to the surface of flexible substrates such as paper, film, non-woven or woven cloth. Finally, the cast film machine, after cooling and forming for a period of time, compresses the composite material with the characteristics of the film layer.

02-17

The production process and use of the laminating machine

With the continuous progress and development of society, most people use machines to operate in life and production, because the use of machinery and equipment can not only improve work efficiency, but also save a lot of work time, etc., thus greatly improving work efficiency. The output of products is reduced, the labor intensity is reduced, and people's work is more convenient. The use of the laminating machine also provides a lot of convenience for people's production and life, especially when in use, the laminating machine is not only pollution-free, but also easier to operate during use, which greatly reduces the cost of raw materials and saves resource waste. Its main production process is to form plastic granules at the die opening of a flat mold after plasticizing the plastic granules through a screw. Linear extrusion adheres to the surface of paper, film, or certain nonwovens, wovens, and other relatively flexible substrates after stretching, which is then shaped and pressed into composites after a period of cooling.

02-17

Laminating machine production line: What should I do if there is a problem with the laminating machine?

1. During the application process, the laminating machine is relatively prone to various problems. If there is a problem, check it in time to avoid damage to the compound machine. Let's see how the laminator adjusts the time to cause eccentric wear.

02-17

Geomembrane production line: Geomembrane equipment plays an important role in hazardous waste landfills

Geomembrane equipment plays an important role in hazardous waste landfills. Geomembrane is undoubtedly the key to the anti-seepage structure of hazardous waste landfills. As a mainstream and effective anti-seepage material, the quality of geomembrane will determine the quality of hazardous waste landfills. Due to the limitations of domestic geomembrane production lines, production management, raw materials, etc., and some "black-hearted" manufacturers use a large number of recycled materials to produce geomembrane, the quality of geomembrane does not meet the requirements of international standards. Therefore, most hazardous waste landfills currently use imported geomembrane materials, and the following will tell you the advantages of HDPE geomembrane.

02-17

Laminating machine production line: difference and future development of laminating machine

Laminating machine is a kind of casting film heated and plasticized by polypropylene or polyethylene plastic extruder. The laminating machine is die-casting, and the surface of woven fabric or kraft paper or non-woven fabric is hot-pressed. The thickness of the high-voltage polyethylene electrostatic layer covered on the surface is only 0.05 cm, which will become a coating machine product. The products produced by the laminating machine production line are odorless, non-toxic and wear-resistant, and can be used for a long time in infrared, ultraviolet, laser or various harsh, acid-base and other ecological or physical and chemical environments.

02-17

Do you know about the correct use of cpp casting machine?

This equipment is a relatively professional equipment. For operators, they need to receive professional training before they can operate. Only correct operation can ensure the normal production of our casting machine. To prolong the life of our equipment, today Xiaobian will take you to learn more about the correct use of cpp casting machine!

02-17

The company's technical team has rich experience and strong research ability

The company's technical team has rich experience and strong ability to tackle key problems. The equipment created is stable and reliable, with excellent indicators and high flexibility, which has been recognized and praised by the majority of users. On the way forward, Zhulong people always insist on coming from production to customers, strive to create leading quality and help customers take off!

02-17

Changzhou Zhulong Machinery Co., Ltd. was born in Longcheng on the shore of Taihu Lake

Changzhou Zhulong Machinery Co., Ltd. was born in Longcheng, a modern equipment manufacturing base on the shore of Taihu Lake, Changzhou City, Jiangsu Province.

02-17

The company is located in Lushu East Road, Xuejia Town Industrial Zone, Xinbei District, Changzhou City

The company is located in Lushu East Road, Xuejia Town Industrial Zone, Xinbei District, Changzhou City, adjacent to expressways and airports, with convenient transportation. Accumulating nearly 20 years of experience in plastic machinery production technology and hundreds of sets of plastic machines at home and abroad, Zhulong Machinery has developed and successfully put into production high-speed cast film unit, cast breathable film production line, multi-layer co-extrusion cast unit, Various types of lamination and coating composite units, geotextile production lines, cast film and waterproof sheet production lines, EVA solar cell film packaging production lines, stone paper production lines, and small and medium-sized color testing machines.